10CHAN DIY – Voltage Source & Faderbank for Desktop or Eurorack Synthesizer

10CHAN DIY is the simplified version of 10CHANultmt.

It´s sharing the same specs instead of vactrol mutes.

It looks and feels like a mixer, but it´s NOT mixing signals!

It´s a 10 channel faderbank that acts as attenuator or voltage source.

The voltage range of a fader pair can be defined on the backside via jumpers. (5V & 9V)

It´s made for audio and cv signals 😉

With plugging a signal into an input the corresponding fader becomes an attenuator.

With no signal plugged the output becomes a voltage source that can be attenuated with the fader.

Ready for desktop use or unmount the baseplate to fit into an eurorack while getting a 40HP blank panel with unique graphics.


Depth: 25mm

Height (Desktop): 45mm

+12V 50mA (all Faders on)

%d bloggers like this: